 The DL05 and the DL06 product lines are a family of micro
PLCs designed to fit more applications than any other PLC family in
their class.
Starting with the DL05 at 8 inputs/ 6 outputs,
all the way up to the fully expanded 100 I/O DL06 PLC, these PLCs
are a standard that can grow with the changing needs of your machine
or process control applications.
Features include:
- Eight inputs and six outputs (integrated), expandable to 30
I/O total
- Six I/O models of AC, DC and relay I/O
- 2 K program memory
- 4 K data memory
- Two communication ports
- Supports networking for MODBUS RTU master/slave, a DeviceNET
slave option module, and an Ethernet option module
- Removable terminal block connectors
- Six I/O configurations
- DC-powered DD and DR models
- 129 instructions, including four PID* loops
- Powerful functions like FOR/ NEXT loops, subroutines, and drum
sequencers
- Removable terminal block
*NOTE: PID (Proportional,
integral, derivative) control: Control algorithm that is used to
closely control processes such as temperature, mixture, position,
and velocity. The proportional portion takes care of the magnitude
of the error. The derivative compensates for the rate of error
change. The integral takes care of small errors over time.
Four super-easy PID loops
PID (Proportional, integral, derivative) control: Control
algorithm that is used to closely control processes such as
temperature, mixture, position, and velocity.
The
proportional portion takes care of the magnitude of the error. The
derivative compensates for the rate of error change. The integral
takes care of small errors over time.
The DL05 micro PLC
comes with PID built right in.
While some of the traditional PLC
companies require separate ladder instructions for each loop and for
loop scheduling, we make it automatic.
- Fill out a chart for alarms and ramp soak
- Automatic loop scheduling
- Programming software includes the loop tune screen with
trending
- Loop auto-tuning, which allows the CPU to automatically
determine the near-optimum loop settings
|
|
DL05 APPLICATIONS
Use the DL05 programmable logic controller to:
- Build a micro process monitor/ controller using the PID
function and analog input option module. Add a local operator
interface to set and view parameters.
- Network distributed I/O nodes with local intelligence that can
also communicate globally.
- Use 10-30 VDC powered units in remote locations for data
monitoring and control.
Networked DL05 units for low-cost
machine or process control
The DL05 offers super-easy master/slave networking with no added
cost besides the cabling.
For a network of more than two
units, RS232/ RS422 converters must be used.
If you need
more than the 14 discrete I/O in the DL05, simply connect to one or
more units using one of the two communication ports.
MODBUS
RTU, DirectNET and K-sequence protocols are supported so you can
also connect to other PLCs.
And...you can install any option
module (analog input, real-time clock, thermocouple input, RTD
temperature input, DeviceNET slave, Profibus slave) in each of the
DL05s on the network!
Remote Monitoring
Combine one of our AC- or DC-powered DL05 PLCs with a compatible
modem.
The DL05 has two serial ports, with Port 2 settings
being configurable to accommodate the most common modems.
This combination can really save you money on service calls,
data acquisition, up-time and down-time trending and more.
High-speed counting and pulse
outputs
Selected DL05 micro PLCs offer built-in high-speed input features
(on units with DC inputs) and pulse output features (on units with
DC outputs).
Use the DL05 PLC to solve a diverse range of
positioning and high-speed machine control applications.
(NOTE: Only one high-speed I/O feature
may be in use at one time. You cannot use a high-speed input and the
pulse output at the same time.) |
