• Line reactors used on the input side of a drive protect the AC drive from transient overvoltage conditions typically caused by utility capacitor switching. Input line reactors also reduce the harmonics associated with AC drives, and are recommended for all installations.
  
  
• Line reactors used on the output side of a drive (load reactors) protect the motor insulation against AC drive short circuits and IGBT reflective wave damage, and also allow the motor to run cooler by "smoothing" the motor current waveform. Output reactors are recommended for operating "non-inverter-duty" motors and for any motors when the length of wiring between the AC drive and motor exceeds 75 feet.
  
  

• There are two series of AutomationDirect line reactors that can be used with GS series AC Drives: the original GS series reactors (legacy) and the newer LR series line reactors. New applications should use the LR series of line reactors for cost savings. NOTE: LR-Series line reactors can also be used with a variety of other VFD brands.
  
  
• LR series reactors have universal mounting feet with multiple mounting slots, and they can replace most reactors using the existing mounting holes. Use four bolts to mount the reactors to the mounting panel. LR series line reactors can be used on the input or output side of any manufacturer's AC drive.
  
  
  
  

• Sizes from 0.25HP to 300HP
• Single-phase VFD line reactors - 115 and 230 VAC (true single phase reactors, no center phase winding)
  
• Three-phase VFD line reactors - 230, 460, 575 VAC
• Universal mounting feet with multiple mounting slots; can replace most reactors using existing mounting holes
• Lugs are included and attached when required
• 10-year warranty

• AC Variable Frequency Drives (VFD)
• DC drives – (line side only)
• Any type of drive that creates a non-sinusoidal waveform
• Use line reactors to reduce:
  - voltage notching
  - harmonics
  - potential reflective wave damage

• _CUL_US listed (E197592)
• CE marked
• RoHS

LR Series Line Reactors Overview