DirectLOGIC 205 (DL205) PLC - Analog I/O
Modules
The DL205 PLC line offers a wide variety
of different analog modules, including thermocouple (16-bit) and RTD (16-bit).
The modules support an incredible range of signals including 4-20 mA (sinking
and sourcing), 0-5 V, 0-10 V, -5 V to +5 V, and -10 V to +10 V, allowing
the DL205 PLC to connect to almost any device including pressure transmitters,
proportional valves, AC drives, panel meters and more. The 16-bit thermocouple
module can also be configured to measure 16-bit input signals of -5 to
+5 VDC, 0-156 mv, -156 mv to +156 mv.
Available modules include:
Analog Input Modules
- F2-04AD-1 - 4-channel 4-20 mA
- F2-04AD-2 - 4-channel 0-5 V, 0-10
V, -5 V to +5 V, -10 V to +10 V
- F2-04AD-1L - 4-channel 4-20 mA
(uses 12VDC supply)
- F2-04AD-2L - 4-channel 0-5 V,
0-10 V, -5 V to +5 V, -10 V to +10 V (uses 12 VDC supply)
- F2-08AD-1 - 8-channel 4-20 mA
- F2-08AD-2 - 8-channel 0-5 V, 0-10
V, -5 V to +5 V, -10 V to +10 V
Analog Output Modules
- F2-02DA-1 - 2-channel 4-20 mA
- F2-02DA-2 - 2-channel 0-5 V, 0-10
V, -5 V to +5 V, -10 V to +10 V
- F2-02DA-1L - 2-channel 4-20 mA
(12 VDC supply)
- F2-02DA-2L - 2-channel 0-5 V,
0-10 V, -5 V to +5 V, -10 V to +10V (uses 12 VDC supply)
- F2-02DAS-1 - 2-channel 4-20 mA,
16-bit isolated
- F2-02DAS-2 - 2-channel 0-5 V,
0-10 V 16-bit isolated
- F2-08DA-1 - 8-channel 4-20 mA,
sink/ source selectable
- F2-08DA-2 - 8-channel 0-5 V, 0-10
V
Analog Combination Input/Ouput modules
- F2-4AD2DA - 4-channel in/ 2-channel
out 4-20 mA
- NEW! F2-8AD4DA-1
- 8 channel analog input module and 4 channel analog output module.
Inputs: Selectable 16 bit, 14-bit, or 12-bit resolution, range:
0-20 mA.
Outputs: 16 bit resolution, range: 4-20 mA, current sourcing.
NOTE: Not supported in D2-230 and D2-240 DirectLOGIC
CPUs.
- NEW! F2-8AD4DA-2
- 8 channel analog input module and 4 channel analog output module.
Inputs: Selectable 16 bit, 14-bit, or 12-bit resolution, range:
0-5 VDC, 0-10 VDC.
Outputs: 0-5 VDC at 15 bit resolution, 0-10 VDC at 16 bit resolution.
NOTE: Not supported in D2-230 and D2-240 DirectLOGIC
CPUs.
Temperature
- F2-04RTD - 4-channel RTD input;
0.15 C resolution
- F2-04THM - 4-channel 16-bit; thermocouple
and millivolt
NOTES: New option modules
may not be supported by CPUs purchased prior to the modules release.
Be sure to check for the latest firmware for your PLC. You can refer to
the module specification page on our Web site for this information, or
find it in our free catalog.
Here is the direct link to the Firmware Upgrade section of our Web site
where you can find the firmware revision histories, the latest files and
tools required to download the firmware into your CPU.
|