DL 405

Our most powerful PLC!

• D4-430 (6.5K memory max, 1152 I/O max.)
• D4-440 (22.5K memory max, 1664 I/O max.)
• D4-450 (30.8K memory max, 3584 I/O max.)

• Four-slot
• Six-slot
• Eight-slot

• 12/24VDC
• 110/220VAC
• 125VDC

• AC/DC in/out
• 5A relay out
• 12-bit and 16-bit analog inputs and outputs
• Thermocouple and RTD inputs
• Remote I/O and "slice" remote I/O

• Data communications, including SDN (Shared Data Network), Modbus and Ethernet module
• Three different Basic CoProcessor™ modules. Up to 512K of memory supports Basic programs and data storage.
• Magnetic Pulse module calculates flow totalization, instantaneous flow rate, indicated volume and gross volume

MORE DETAILS CPUs and Expansion Units

D4-430 - 6.5K memory, two communication ports, built-in 110/220 VAC power supply

D4-440 - 22.5K memory, two communication ports, built-in 110/220 VAC power supply

D4-450 - 30.8K memory, 16 built-in PID loops, floating-point math, 4 logical communication ports, remote I/O support, built-in power supply in 12/24 VDC, 110/220 VAC or 125 VDC power versions. Expansion units allow additional local I/O; 110/220 VAC, 24V DC or 125 VDC power supply versions

Check the PLC System Specification Guide for an overview of each CPU's capabilities.

I/O Bases Bases require CPU or expansion unit for power Four-slot, Six-slot, Eight-slot

Discrete modules in 8, 16, 32 and 64-point I/O densities

Use our ZIPLink pre-wired I/O cables and connector modules for easy wiring, especially to our 64-point DC modules.

Check our PLC System Specification Guide for a quick overview, or the DL405 discrete I/O tech specs or DL405 price list for details.

Wide range of analog modules

Our analog I/O selection will give you the flexibility you need to perform low-cost process or data acquisition applications.

We have 4, 8 and 16-channel models with input and output ranges such as 4-20mA, 0-10V, and bipolar ranges; isolated or non-isolated, 12 or 16-bit, thermocouple, RTD and millivolt modules. For example, our 8-channel F4-08AD analog input module offers eight channels of analog inputs and supports 4-20mA, 0-20mA, 0-5V, 0-10V, 1-5V, +/-5V, and +/-10V (seven ranges) for the low price. For high-density analog, our new F4-16AD-1 module supports 16 channels of current inputs. Check our PLC System Specification Guide for a quick overview of all our analog modules, or the DL405 analog I/O tech specs or DL405 price list for details.

Specialty modules to complete the system Applications requiring

the DL405's power and I/O count usually have some sort of special interfaces.

Remote I/O (D4-RM and D4-RS) in rack-based configurations Remote I/O (D4-SM and D4-SS-xx modules) in module-based configurations

Ethernet Communications modules (H4-ECOM, H4-ECOM-F and H4-ECOM100)

Data communications module (D4-DCM) Shared Data Network module for high-speed local data sharing (F4-SDN)

SDS I/O master module to connect to intelligent I/O (F4-SDS)

MODBUS master and slave communication modules (F4-MAS-MB and F4-SLV-MB)

Ethernet base controller replaces CPU for PC-based control I/O (H2-EBC and H2-EBC-F)

Triple-port BASIC co-processor modules (F4-CP128-x)

Counter interface module (D4-HSC)

16-loop PID Coprocessor module for CPU-independent control (F4-16PID) 4-loop temperature controller (F4-4LTC)

Magnetic pulse input module performs calculation for flow and volume (F4-8MPI)

Interrupt input module for high-priority events (D4-INT)

DirectSOFT5 is our full-featured 32-bit Windows-certified programming package It supports all five DirectLOGIC families of PLCs simultaneously, including all DL05s, DL105s, DL205 CPUs, DL305 CPUs, DL405 CPUs, and most of their Koyo cousins. it supports an incredible array of on-line/off-line programming and documentation features. Use the PID screens for fill-in-the-blank setup and loop tuning.