We are so excited about the new CLICK series that we are giving away a CLICK PLUS to one of our lucky subscribers.

 

Simply tell us how you would incorporate the new CLICK PLUS range and MQTT client in an IIoT project for your chance to win! The prize includes over $700 worth of gear. Answers collected via survey monkey below...

 

  ENTER HERE  

 

C2-03CPU  $395

WiFi LAN/Bluetooth, Ethernet, serial and micro-B USB ports, microSD card slot

C2-08DR-4VC  $199

OPTION SLOT MODULE- CLICK PLUS discrete/analog combo module, Analog Input: 2-channel, current/voltage, Analog Output: 2-channel, current/voltage, Discrete Input: 4-point, sinking/sourcing, Discrete Output: 4-point, relay, (4) Form A (SPST) relays.

SE-ANT210  $19

STRIDE whip/straight 2.4 GHz WiFi antenna, IP65, connector mount.

C0-01AC  $96

CLICK AC power supply, 100-240 VAC nominal input, 24 VDC nominal output, 1.3A continuous.

 

Terms and conditions apply and are below.

CLICK PLUS PLC contest is is open from 15th April 2021 and closes 5pm Saturday 15th May 2021. One entry per person. Open to newsletter subscribers 18 years of age and over and suitably qualified to wire a PLC. Winner will be notified by phone and email using details provided upon entering. Winner will be announced in the June edition of the email newsletter. For privacy reasons, personal identification will be limited to initials and State. Open to Australia & NZ email newsletter subscribers only. Winner chosen on merit, in response to competition question. Decision of the judge is final. The prize is ‘not transferable’ and ‘not redeemable for cash’. By entering the contest you're agreeing to receive marketing correspondence from Direct Automation. Personal details are required to notify winner and will not be used for any other purpose or stored for future promotions.

 

Personal details are required to notify winner and will not be used for any other purpose or stored for future promotions. Direct Automation's privacy policy extends to this competition and policy details can be found on our website. Every reasonable effort will be made to notify the winner, please ensure the details you provide are correct. If you win and don't answer your phone or reply to your email after multiple attempts, we will select the next best entry response. And so on and so on. Entry forms collected via Survey Monkey. Direct Automation denies any responsibility or liability for any technical errors or events in the use of this survey platform. If you really don't want to use Survey Monkey, shoot us an email with your details and competition answer at News@directautomation.com.au within the competition time frame. By entering into this giveaway promotion competition thingy, you agree to your competition response to be published in our marketing collateral (print and digital) and acknowledge that across some platforms, especially digital social media channels, your response may be viewed and/or shared by the general public.

Prize includes the new CLICK PLUS C2-03CPU from CLICK Koyo and AutomationDirect (USA), C0-01AC Power Supply, SE-ANT210 (antenna), C2-08DR4VC (Optional Slot Module) only. All other components, accessories and any other associated costs are not included and are at the prize winner’s expense. Total prize value at trade price $709 as of 6 April 2021.

This promotion is for marketing purposes to shamelessly plug and grow our email marketing channels and to promote the new CLICK PLUS PLC range. Entrants must be a subscriber to our monthly newsletter to enter. Direct Automation assumes this competition will reach our client base and entrants will have relevant qualifications and expertise within the industrial automation industry. Direct Automation reserves the right to disqualify entrants that are not suitably qualified or not licensed to operate a PLC. Please do not enter if you know this is you. This PLC is not a toy. It should only be operated by a fully licensed electrician or similar. Failure to operate electrical equipment responsibly and as intended, can result in serious injury or possible death. To the full extent permitted by applicable law, Direct Automation will not be liable to You or any party on any legal theory (including, without limitation, negligence) for any damages whatsoever, including without limitation any general, special, incidental or consequential damages arising in connection to this promotion.

 

Limit of Liability

a. To the full extent permitted by applicable law, and except for any liability arising from contrary agreement, in no event will the Licensor be liable to You on any legal basis (including without limitation, negligence) for any loss or damage whatsoever, including (without limitation):

  • loss of production or operation time, loss, damage or corruption of data or records; or
  • loss of anticipated savings, opportunity, revenue, profit or goodwill, or other economic loss; or
  • any special, incidental, consequential, punitive or exemplary damages arising out of or in connection with this Licence or the use of the Work, even if the Licensor has been advised of the possibility of such damages.

b. If applicable legislation implies warranties or conditions, or imposes obligations or liability on the Licensor in respect of this Licence that cannot be wholly or partly excluded, restricted or modified, the Licensor’s liability is limited, to the full extent permitted by the applicable legislation, at its option, to:

  1. in the case of goods, any one or more of the following:
    • the replacement of the goods or the supply of equivalent goods;
    • the repair of the goods;
    • the payment of the cost of replacing the goods or of acquiring equivalent goods;
    • the payment of the cost of having the goods repaired; or
  2. in the case of services:
    • the supplying of the services again; or
    • the payment of the cost of having the services supplied again.

c. The Trade Practices Act 1974 (Cth), and the corresponding State and Territory fair trading legislation, restrict the limitation of liability in certain circumstances, such as a contract for the supply of goods or services of a kind ordinarily acquired for personal, domestic, or household use. Clauses 6(a) and 6(b) cannot and are not intended to apply in circumstances where it is prohibited by law.

 

Representations, Warranties and Disclaimer

a. Except as expressly stated in this Licence or otherwise agreed to by the parties in writing, and to the full extent permitted by applicable law, the Licensor offers the Work "as-is" and makes no representations, warranties or conditions of any kind concerning the Work, express, implied, statutory or otherwise. This includes, without limitation, any representations, warranties or conditions regarding:

    1. the contents or accuracy of the Work;
    2. title, merchantability, or fitness for a particular purpose;
    3. non-infringement;
    4. the absence of latent or other defects; or
    5. the presence or absence of errors, whether or not discoverable.

b. The Trade Practices Act 1974 (Cth), and the corresponding State and Territory fair trading legislation, imply certain warranties and conditions in certain circumstances, such as the right to supply or fitness for purpose of goods or services supplied to a consumer. Clause 5(a) cannot and is not intended to exclude, restrict or modify these warranties.

 

Sections of this terms and conditions derive from Creative Commons Attribution 3.0 which can be found at https://creativecommons.org/licenses/by/3.0/au/ 

If you have any questions about the CLICK PLUS GIVEAWAY Competition and its terms and conditions, please feel free to contact News@directautomation.com.au