You have no items in your shopping cart.
Featured Products
-
-
-
P2-550
Productivity2000 CPU module, 50 Mbyte user memory, real time clock/calendar, 4 x 10 character OLED display, RS-232 (RJ12) port with Modbus RTU Master/Slave and ASCII In/out protocol(s) at up to 115.2 kbaud, RS-485 (3-wire terminal block) port with Modbus RTU Master/Slave and ASCII In/out protocol(s) at up to 115.2 kbaud rate, Ethernet (RJ45) port with EtherNet/IP Scanner/Adapters, Modbus TCP, programming and monitoring protocol(s) at 10/100 Mbps, Ethernet (RJ45) port with GS Drives via GS-EDRV100 protocol(s) at 10/100 Mbps, microB-USB port with programming and monitoring protocol(s), microSD card slot for program transfer and data logging
$495.00 -
-
-
-
-
CWB12-11-30D25
Contactor 12 Amps 3 Normally Open Power poles Coil voltage 240 VAC 1 Normally Open / 1 Normally Close Auxilary Contact
$22.00
-
CWB18-11-30D25
Contactor 18 Amps 3 Normally Open Power poles Coil voltage 240 VAC 1 Normally Open / 1 Normally Close Auxilary Contact
$24.00 -
CWB25-11-30C03
Contactor 25 Amps 3 Normally Open Power poles Coil voltage 24 VDC 1 Normally Open / 1 Normally Close Auxilary Contact
$52.00 -
CWB25-11-30D25
Contactor 25 Amps 3 Normally Open Power poles Coil voltage 240 VAC 1 Normally Open / 1 Normally Close Auxilary Contact
$32.00 -
CWB32-11-30C03
Contactor 32 Amps 3 Normally Open Power poles Coil voltage 24 VDC 1 Normally Open / 1 Normally Close Auxilary Contact
$65.00
-
CWB32-11-30D02
Contactor 32 Amps 3 Normally Open Power poles Coil voltage 24 VAC 1 Normally Open / 1 Normally Close Auxilary Contact
$42.00 -
CWB32-11-30D25
Contactor 32 Amps 3 Normally Open Power poles Coil voltage 240 VAC 1 Normally Open / 1 Normally Close Auxilary Contact
$42.00 -
CWB38-11-30C03
Contactor 38 Amps 3 Normally Open Power poles Coil voltage 24 VDC 1 Normally Open / 1 Normally Close Auxilary Contact
$70.00 -
CWB38-11-30D02
Contactor 38 Amps 3 Normally Open Power poles Coil voltage 24 VAC 1 Normally Open / 1 Normally Close Auxilary Contact
$49.00
Ethernet Interfaces for Digital & Analog I/O
Web-IO®
Detect, monitor and control in the network
Web-IOs are components for implementing small and medium-size remote IO and monitoring applications over TCP/IP Ethernet.
Each Web-IO has a user-friendly user interface and can be used as a stand-alone device for direct access to individual IO or measuring points. Then for example digital outputs are switched via MQTT or e-mail messages are sent when one of the inputs changes its state.
For larger installations with multiple Web-IOs the Motherbox can be used as a practical "control center".
A multitude of M2M protocols on the application, network and fieldbus levels also supports integration into existing MES, Scada or monitoring systems.
N.B These products are currently not stocked but available on request
There are no products matching the selection.
