Contactor 105 Amps 3 Normally Open Power poles Coil voltage 24..28 VDC. 0 Auxiliary Contacts
Latest Automation news
Just released at Direct Automation is the new Widescreen 7-Inch C-more EA9 Touchscreen HMIs. These deliver top level functionality, usability and value to our popular C-more touch panel family. With logic, math, alarming, remote accessibility and a myriad of supported protocols, C-more EA9 series HMIs are capable, practical graphical displays. The C-more 7-inch widescreen touch panels are equipped with 800 MHz CPUs and 800 x 480 resolution WVGA displays. For more information, visit C-more EA9 HMIs
Non-Contact Magnetic Safety Switches ... New! Non-contact safety switches are interlocking devices that are designed to protect both people and machines. They are preferred in certain applications where no physical contact (under normal conditions) takes place between the switch and actuator.
Available in industry standard style plastic and stainless steel housings
Styles: Non-contact magnetic and non-contact coded magnetic
Wide (>10mm) sensing distance
High tolerance to misalignment after sensing
Enclosure protections: IP67, IP69K
All Models: cULus, RoHS, CE approvals
Non-Contact Coded Magnetic Safety Switches Coded non-contact safety switches use coded magnets to close the circuits, thereby offering even more protection. The safety switch and actuator work together in such a way that the enable condition from the safety device is only triggered if the actuating element is within the switch's response range and the code on the actuator matches that of the switch.
Non-Contact Magnetic Safety Switches These are simple magnetic reed switches and are designed to conform to IEC 60947-5-3 and be used as directed by EN1088, EN ISO12100 and EN 60204-1.
Warning: Machine safety products sold by Direct Automation Pty Ltd are Safety components only.
The purchaser/installer is solely responsible for the application of these components and ensuring all necessary steps have been taken to assure each application and use meets all performance and applicable safety requirements and/or local, national and/or international safety codes as required by the application. Direct Automation Pty Ltd cannot certify that our products used solely or in conjunction with other Automation Direct Pty Ltd or other vendors products will assure safety for any application.
Any person using or applying any products sold by Direct Automation Pty Ltd is responsible for learning the safety requirements for their individual application and applying them, and therefore assumes all risks, and accepts full and complete responsibility for the selection and suitability of the product for their respective application.
Direct Automation Pty Ltd does not provide design or consulting services, and cannot advise whether any specific application or use of our products would ensure compliance with the safety requirements for any application.
Please Note: We do not guarantee or warrant the products described on this website or any document or other printed matter are suitable for your particular application, nor do we assume any responsibility for your product design, selection of product, installation or operation
All Prices shown on this website are trade prices and are Exclusive of GST
This website including any publications on this website may contain references to products produced and/or offered by other companies. The product and company names may be trademarked and are the sole property of their respective owners. Direct Automation Pty Ltd disclaims any proprietary interest in the marks and names of others.