Contact details- AU: 1800 633 040 NZ: 0800 633 040 INT: +61 7 55353217

You have no items in your shopping cart.

CLICK Ethernet PLC

What's New! ... New CLICK Ethernet PLC Units
that have a 10/100 Mbps multipurpose Ethernet port for faster networking and control. Use the built-in Ethernet port to program your system, network your CLICK or control Ethernet-enabled devices. Using the Modbus TCP protocol, the new CLICK PLCs will easily integrate into existing networks and provide a simple, cost effective solution for your application.

List  Grid 

8 Item(s)

per page

List  Grid 

8 Item(s)

per page

The new PLCs are 3 to 10 times faster than the existing CLICK PLCs and are 100% upward compatible with the existing CLICK units.

With 8 input points and 6 output points built in, CLICK Ethernet PLC units are available with 24 VDC or 120 VAC inputs and DC or relay outputs and can be used as a complete PLC system. Ethernet Basic PLC units and Ethernet Standard PLC units feature one built-in 10/100 Mbps Ethernet communications port for both programming and Modbus TCP networking, plus one standard RS-232 serial communications port; Ethernet Standard PLC units add an RS-485 port.

Additionally, CLICK Ethernet PLC units include a calendar/real time clock and battery backup for the internal SRAM; the battery, sold separately, allows data to be retained for five years. The Ethernet capabilities of these new CLICK units also allow for run time edits, which means edits to the ladder project can be downloaded while the CLICK PLC keeps running, an important addition to an already extremely practical PLC.

The new CLICK Ethernet PLC units are configured with the easy-to-use programming software, available as a free download.